Hotline:400-6803-885
Contact
Dongguan Dongrui Machinery Technology Co. Ltd.
National advisory hotline: 400-6803885
Contact: Mr. Xie
Cell phone: 13929260591
Tel: 0769-85045049
Fax: 0769-23111685
URL: www.dgdongruixieji.com
Address: Dongcheng District, Dongguan City, the cattle outside the Industrial Park Wai Feng Road, No. 2
EVA sole injection molding machine has any improvement and different places


 In front of us introduced the principle and the function of a sole injection molding machine, then EVA sole injection molding machine and what is different, is there any new features?
New properties of EVA sole injection molding machine:
(1) modifier A can improve the mechanical properties of /VAC E, but the mechanical properties of the matrix can be decreased with the increase of the content of the B. In the case of the same ratio of blowing agent and crosslinking agent, the density of foamed material was lower than that of the A dosage of the modifier. It was found that the addition of modifier A made the blend matrix more easily.
(2) the study on the foaming materials with similar density obtained from different substrates shows that the properties of the matrix are consistent with the properties of the foamed materials. Under the suitable ratio, the addition of modifier A can increase the peel strength of the foaming material, and the hardness of the foaming material can be reduced in some proportion.
(3) through investigation with different amount of crosslinking agent DCP and foaming agent AC on properties of foamed materials, found the DCP content was increased with the increment of the density of the foamed material becomes larger and is accompanied by the improvement of foaming material hardness and peel strength; elasticity with increase of the concentration of DCP and increased firstly and then decreased. The amount of AC increases with the decrease of the density of the foamed material, and decreases with the increase of the hardness and the peel strength of the foamed material. The elasticity increases with the increase of the AC content.
In short, EVA sole injection molding machine has a lot of good places.

 

Related articles